The Routing and Gateways section allows the configuration of the routes that are activated when the system boots up or when the network settings are fully re-applied. It shows both boot time configuration and the current, active configuration.
Table of Contents
Boot Time Configuration
- The Boot Time Configuration section allows the configuration of the routes that are activated when the system boots up or when the network settings are fully re-applied.
| Note |
|---|
| Be careful when configuring this section as incorrect changes may affect the system and cut the system running Webmin off from the rest of the network. |
- Navigate to Boot Time Configuration tab.
- Specify the default routes by entering the Interface, Gateway and IPv6 Gateway values in the Default Routesroutes field.
- Specify whether it should act as a router or not by choosing Yes or No option in the Act as Routerrouter field.
- Specify the static routes by entering the Interface, Gateway and IPv6 Gateway values in the Static Routesroutes field.
- Specify the local routes by entering the Interface, Gateway and IPv6 Gateway values in the Local Routesroutes field.
- Click Once done, click the Save button.
The changes made for the boot time configuration will be updated.
Active Configuration
- The Active Configuration section lists the routes that the system currently has configured. It allows active routes to be added or removed on some systems.
| Note |
|---|
| Be careful when configuring this section as incorrect changes may affect the system and cut the system running Webmin off from the rest of the network. |
Creating an Active Route
- Create an active route in the Create
- active route section under the Active
- configuration tab.
- Specify the destination of the route in the Route Destination destination field either by choosing the Default value or entering the manual value.
- Specify the netmask for destination route in the Netmask for Destination destination field either by choosing the Default value or entering the manual value.
- Specify the via route by entering the Network Interface, Gateway and IPv6 Gateway values in the Local Routes field.Click and Gateway values in the Route via field.
- Once done, click the Create button.
An active route will be created.
Deleting a Route
Delete a route in the Create Active Route section under the Active Configuration tab.
Select- From the Active configuration tab, select the route to be deleted from the list of routes.
- Click the Delete Selected Routes button.
