Page Comparison

Symptoms

Many Cloud environments today use a hybrid of Windows and Linux servers for their hosted applications. Keeping proper ownership between Windows Active Directory and Linux CIFS/NFS can be very challenging but is vital for various reasons:

...

SoftNAS uses Sernet Samba to accomplish CIFS and Active Directory integration. SoftNAS can also sync these permissions and File Ownerships to NFSv4 Clients running Linux based Operating systems.

Purpose

In the following guide, we will provide step-by-step instructions on how to properly configure hybrid ( Windows and Linux ) systems to fully integrate with SoftNAS Samba CIFS/NFS shares. These permissions will also sync to CIFS/NFSv4 Linux clients that are also Joined to Active Directory. Let's get started!

1.  As the first prerequisite, SoftNAS needs to be joined to Active Directory. Before joining Active Directory with our simple wizard, make sure that the prerequisites listed in Configuring Network Settings are met. Then, simply follow the instructions provided by the wizard in the SoftNAS UI → Volumes and LUNs→ Active Directory Wizard using the instructions here: Active Directory Configuration.
   
   
2. A properly configured DNS is another very important prerequisite to the implementation of a kerberos authentication back-end. On that note, before continuing with guide, please make sure that a properly configured DNS is in place.The example below will demonstrate how a properly configured DNS looks like. From SoftNAS, we used the 'nslookup' command:
   #. nslookup <hostname>
   #. nslookup <IP>
   
   
3. Next, let's configure NTP to make sure that our time is in sync with SoftNAS/AD using the link here.
   
   
4. Edit the SoftNAS smb.conf file to include the 2 lines below. The "SOFTNAS" portion must be changed to your workgroup name configured in your smb.conf file after joining AD.
   1. idmap config SOFTNAS:backend = rid
      idmap config SOFTNAS:range = 10000-99999
   
          b. Our example /etc/samba/smb.conf has added the two lines above:
    
   
5. Restart the SoftNAS samba services and flush the cache for the changes to take effect:
   #. service sernet-samba-winbindd restart
   #. service sernet-samba-smbd restart
   #. service sernet-samba-nmbd restart
   
   
6. The commands below will help to verify the RPC calls we make to AD moving forward.
   # wbinfo -t 
   # wbinfo -m
   #. wbinfo -u | tail 
   #. wbinfo -g | tail
   #. getent passwd | tail 
   
   
   1. In order to enable NFS kerberos authentication from AD we need to make some changes to the NFS /etc/export file to include the line below.
      #. vim /etc/exports 
      #. copy and paste this line as showing below sec=sys:krb5:krb5i:krb5p
      
      
   2. By default, the NFS security feature is not enabled by SoftNAS, so we would have to switch it on manually, and the example below will show you exactly how.
       #. vim /etc/sysconfig/nfs
      #. Search for SECURE_NFS="yes" and uncomment it. 
      
      
   3. In this step, we are going to add an NFS upn-principle to allow us to turn on the "rpcsvcgssd,rpcgssd"
      
      Image Modified

7. Next, let's install the necessary packages if they are not already installed on our Linux clients:

   1. RHEL 7/CENTOS 7: #  yum -y samba-winbind-clients samba-winbind krb5-workstation krb5-libs cifs-utils nfs4-acl-tools
      
      

   2. UBUNTU 16.04: # apt update && apt upgrade
      
      
      

   Info
   Note: The steps above are important to avoid dependency conflicts, or obsolete packages which might hinder the installation of the new packages below.

                          #. apt install -y samba winbind krb5-user libpam-winbind libnss-winbind  cifs-utils nfs4-acl-tools
   
   

8. In order to establish a communication relationship between AD and our Linux Client(s) a proper DNS record must be in place; and since we already have one on our SoftNAS system we can just copy it over using the command below:

   #. vim /etc/resolv.conf
   
   
   
   

9. To have a unified GID/UID mappings with SoftNAS/AD for the interest of seamless integration; copy and paste the "[ global ]" section of the smb.conf file ONLY, from SoftNAS ( This step applies to all Linux Distributions ). The end result should look like the output of step #2. b
   #. less /etc/samba/smb.conf
   #. mv /etc/samba/smb.conf  /etc/samba/smb.conf.BAK && vim /etc/samba/smb.conf

   
   

10. The /etc/krb5.conf file is responsible for controlling the SoftNAS/AD kerberos authentication backend in order to establish a secure trust relationship necessary to hand out kerberos ticket which will allow us to join AD in step #12. And since there is one readily available on SoftNAS; copy it over using the commands below:
    #. cat /etc/krb5.conf  from SoftNAS 
    #. mv /etc/krb5.conf  /etc/krb5.conf.BAK & vim /etc/krb5.conf to your Linux Client(s). 
    
    
11. Next, let's restart our samba winbind services , and flush the cache: 
    
    1. RHEL 7/CENTOS 7: # service smb restart && service nmb restart && service winbind restart && net cache flush
       
       
    2. UBUNTU 16.04: #  service smb restart && service nmb restart && service winbind restart && net cache flush
       
       
12.  To ensure that our CIFS/NFS services would come back up on system reboot, lets enable the services involved, by running the commands below:
    1. RHEL 7/CENTOS 7: #. systemctl enable winbind smb nmb  
       
       
    2. UBUNTU 16.04: #. systemctl enable winbind smbd nmbd winbind
       Note: The commands above are the only commands we borrowed from RHEL 7/CENTOS 7 & UBUNTU 16.04 because they are native to those versions, therefore if u are on older versions use this command instead chkconfig <service> on
       
       
13. The Linux nsswitch.conf configuration file controls how name resolution works when looking up various types of objects, such as host addresses and passwords, and AD Users & Groups. Without this, we cannot be able to resolve our AD Users & Groups. Therefore, edit the config file and add 'winbind' like the example below:
    #: vim /etc/nsswitch
    Image Modified
14. We are now ready to acquire our first Kerberos ticket to join AD by running the commands below on our systems.
    #. kinit -p buba@SOFTNAS.LOCAL
    
    
15. Next, Lets Join AD while also creating an nfs-upn on the fly by using the command below on RHEL 7/CENTOS 7 & UBUNTU 16.04 respectively:
    
    
    1. RHEL 7/CENTOS 7: # net ads join -U buba createupn=nfs/centos-7.softnas.local@SOFTNAS.LOCAL
       
    2. UBUNTU 16.04: #. net ads join -U buba createupn=nfs/ubuntu-16.softnas.local@SOFTNAS.LOCAL 
       
16. Please refer to step #4 of this guide to complete this step!
    
    
17. Next, lets create mount-points to mount our CIFS/NFS shares and verify:
    
    1. RHEL/CentOS 7: #. mkdir /mnt/cifs /mnt/nfs-sec  /mnt/nfs-krb5  /mnt/nfs-krb5p  /mnt/nfs-krb5i
       UBUNTU 16.04: #. mkdir /mnt/cifs /mnt/nfs-sys  /mnt/nfs-krb5  /mnt/nfs-krb5p  /mnt/nfs-krb5i
       
       
    2. CIFS mounts: for all Linux Distributions: 
        #. mount -t cifs -o domain=SOFTNAS,username=buba,password=Thegladiator1 //na1/cifs1 /mnt/cifs
       
       
    3. NFS mounts for all Linux Distributions :
        #. mount -t nfs  nas1:/pool1/cifs1 /mnt/nfs-syc -o sec=sys
       #. mount -t nfs  nas1:/pool1/cifs1 /mnt/krb5 -o sec=krb5
       #. mount -t nfs  nas1:/pool1/cifs1 /mnt/krb5i -o sec=krb5i
       #.mount -t nfs  nas1:/pool1/cifs1 /mnt/krb5p -o sec=krb5p
        #. df -h 
       
       
       
       
       
       
18. Let's compare ACLs from AD,SoftNAS and Linux Clients: 
    
    
    1. From AD logged in as a "Domain Admin" User
       
       
       1. 
          
       2. 
          
       3. 
          
    2. ACLs from SoftNAS:
       #. cd /pool1/cifs1
       #. getfacl *
       
       
       1. 
          
          
       2. ACLs from  RHEL 7/CENTOS 7 "Client1"
          #. cd /mnt/cifs && ls -ltr && getfacl *
          #. cd /mnt/nfs && ls -ltr && getfacl *
          
       3. ACLS from UBUNTU 16.04 Client "ubuntu1"
          cd /mnt/cifs && ls -ltr && getfacl *
          
    
    
    
19. Our final step is to automate the mounting process on system reboot by utilizing the /etc/fstab file: 
    1. CIFS fstab mount Options: For security reasons, we can create a secure CIFS credentials file call 'creds' to hold our 'Domain Admin user' credentials for auto-mounting, instead of exposing it in plain text in /etc/fstab:
       1. Create the secure file for the /etc/fstab file:
          #. vim ~/.creds && chmod 600 .creds
          
          
       2. Paste the following:
          +
          

          domain=SOFTNAS
          username=buba
          password=Thegladiator1
          #. echo  '//10.0.0.192/cifs1        /mnt/cifs  cifs domain=SOFTNAS,credentials=/root/.creds 0 0' >> /etc/fstab
          
          

    2. NFS fstab mount Options: 
       #. echo 'nas1:/pool1/cifs1        /mnt/nfs    nfs4 rsize=8192,wsize=8192,intr 0 0'  >> /etc/fstab
       
Congratulations! With the right credentials, you can now administer all your SoftNAS shares on different protocols (CIFS/
20. 1. 
       
    2. NFS
) from a single location, using multiple platforms.
Stay tuned for our Advanced CIFS/AD ACLs administration Guide.

...

1. 1. with Krb Authentication:
      #. vim /etc/idmap.conf
      domain = softnas.local 
      #. vim /etc/sysconfig/nfs
      #. net ads join -U buba createupn=nfs/client1.softnas.local@SOFTNAS.LOCAL 
      #net ads join -U buba createupn=nfs/ubuntu1.softnas.local@SOFTNAS.LOCAL
      net ads keytab add nfs -U buba
      
      nfs, rpcbind, rpcgssd, rpcidmapd, or rpcsvcgssd
      
2. Congratulations! With the right credentials, you can now administer all your SoftNAS shares on different protocols (CIFS/NFS ) from a single location, using multiple platforms.
   Stay tuned for our Advanced CIFS/AD ACLs administration Guide.

Related articles

...