Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

In addition to the standard ports required for a basic SoftNAS® configuration (namely SSH and HTTPS - see TCP/UDP ports required for accessing SoftNAS volumes for more details), Lift and Shift™ requires the following ports to be configured: 

Note: 8081 and 9443 must be configured on both target and source node.

PortTraffic Type
8081Data transfer port for Fuusion™ and Lift and Shift™. The target node requires an 8081 port configured with a source node IP address configured with 32 ports (For example: 54.214.15.155/32).
9443Web UI port for viewing Lift and Shift™ on older versions, and for Fuusion. This port requires a 9443 port to be configured with a source node IP address of the instance running the browser used to view StorageCenter™, also configured with 32 ports. (For example: 54.214.15.125/32)


Note: For AWS instances and Azure virtual machines in particular, it is recommended that your SoftNAS® instances be configured with static IP addresses. If not, each time the nodes are stopped and restarted, there is a strong chance that the IP address will change, which will cause your Lift and Shift configuration to fail. On-premise (VMware) instances are less likely to lose assigned IP addresses, even if dynamically assigned, but it is still a risk. 

Sample Azure Security Group Configuration


To configure a Security Group in Azure: 


Sample AWS Security Group Configuration


To configure a Security Group in AWS:


VMware Security Configuration



  • No labels