/
Logs
Logs
- Former user (Deleted)
Owned by Former user (Deleted)
Log-level Settings
Log Level Settings enable you to set the logging verbosity for the SoftNAS StorageCenter software and its modules (eg. SnapReplicate). You can configure separate logging verbosity evels for each module that is available from this page.
The following settings are possible:
- DEBUG - Debug, informational, warning and error messages (all messages)
- INFO - Informational, warning and error messages (default)
- WARN - Warning and error messages
- ERROR - Error messages only
- FATAL - Fatal messages only
- OFF - No messages (not recommended)
Log level settings can be set for the following:
Parameter | Description |
|---|---|
StorageCenter | Setting which determines logging verbosity for the indicated service/module. |
SnapReplicate | Ibid. |
, multiple selections available,
Related content
Create a Write Log (ZIL) for standard SNAP HA deployments
Create a Write Log (ZIL) for standard SNAP HA deployments
More like this
Advanced Configuration Notes for SoftNAS®
Advanced Configuration Notes for SoftNAS®
More like this
Configuring the Read Cache and Write Log
Configuring the Read Cache and Write Log
More like this
Adding ZFS Intent Log/SLOG and L2ARC for SoftNAS Pools
Adding ZFS Intent Log/SLOG and L2ARC for SoftNAS Pools
More like this
SoftNAS® Interface Elements
SoftNAS® Interface Elements
More like this
[SoftNAS KB]: Running and retrieving support reports without email functionality.
[SoftNAS KB]: Running and retrieving support reports without email functionality.
More like this